One embroidered big iron on patch
Let your creativity loose repairing or refreshing your favorite clothes with these fantastic patches!
Create the finest styles and up-cycle your favorite clothes with textile art.
A Embroidery Patche thoughtfully designed and ready to iron on your garment!
You can use iron and sew the corners of the patch to a stretch garment and it will work nice.
Combine this size of patch with any of the other ones to make a nice collage on your garment. S, M and XL choose the same color or mixed them up!
A cute and conscious gift for this Christmas with a beautiful recycled packaging!
One patch of 18cm width and 34cm height approx.
You can iron the patches on any kind of non stretching garment, even leather if the iron is in the lower setting. For Stretching material (fitness clothes for example) iron on the patch and then sew a few stitches on each corner of the patch, that will do.
How to iron on the Pair of Flower Patches, the patch I iron in the pictures is just an example.
1. Lay your cloth on a flat, heat-resistant surface like an ironing board. To ensure the item will provide a good surface for the patch, iron it first. If it's a backpack or another item that's difficult to iron, do your best to arrange it so that the part of the fabric that will be receiving the patch is flat against a hard surface.
2. Place the patch in the position you chose. The adhesive side should be flat against the base fabric. Make sure that the patch isn't crooked. On embroidered patches, the adhesive side is the underside.
3. Heat up an iron. Turn it to the hottest setting your fabric can tolerate. Make sure the "steam" option is turned off, and that your iron isn't full of water.
4. Place a thin towel over the patch. Take care not to disturb the position of the patch. The towel will protect the patch itself and the surrounding fabric.
5. Position the heated iron over the patch and press down. Hold the iron there for about 15 seconds. Apply as much pressure as you can by pressing down firmly.
6. Remove the iron and allow the patch to cool. Lift the towel and check to see whether the patch is fixed on securely by gently rubbing at the edge with a finger, trying to lift it. If it lifts up a bit, replace the towel and press it with the iron again for 10 seconds.
In case you want an advice you can drop me an e-mail to email@example.com and a picture of the garment you want to customize! I made as well tutorials that you’ll receive if you subscribe to my newsletter.